Efficient Photomodulation of Visible Eu(III) and Invisible Yb(III) Luminescences using DTE Photochromic Ligands for Optical Encryption

This work describes a class of complex combining three dithienylethene units and a lanthanide ion used as an optical system displaying a double encryption method: i) a colorful code, drawn and erased under UV and visible irradiations respectively, due to coloration and discoloration of the photochromic entities, and ii) a concomitant gradual disappearance and progressive restoration of the associated lanthanide ion luminescence triggered with the same stimuli. The innovation of the system stems from the emission color tunability, i.e., with either a lanthanide ion emitting only in the visible range (Eu³⁺) or with another lanthanide ion emitting only in the near infrared (NIR) range (Yb³⁺), therefore observable, or not, to the naked eye. This system is the very first one to achieve efficient repeatable modulation of pure NIR luminescence on photochemical command. Furthermore, it is proven to be highly efficient when embedded in a PDMS polymer opening real opportunities for practical applications as anti‐counterfeiting.     

Synthesis of Janus polyaniline–polyelectrolyte complex membrane via in situ confined polymerization

Polyelectrolyte complex (PEC) membranes prepared from poly(styrene sulfonate) (PSS) and poly(diallyldimethylammonium chloride) (PDADMAC) were modified by crossflow polymerization of aniline (ANI). The PEC membranes were used as separators in a two-compartment setup where ANI monomer and ammonium persulfate (APS) oxidant diffused through the membranes to form polyaniline (PANI). APS and ANI having different distributions throughout the membranes, the reaction led to the asymmetric polymerization of PANI on one face of each PEC membrane thus producing Janus membranes. Due to the excess PANI content, the membrane displayed distinct asymmetric electrical conductivities on each face. Interestingly, very different ANI polymerizations were obtained when nonstoichiometric PEC membranes having different molar ratio of cationic and anionic polyelectrolytes (P⁺:P^? represents PDADMAC:PSS) were used and transport of APS was fastest through the 2:1 PEC when compared to the 1:2 PEC. In all experiments, the polymerization was most intense on the ANI side of the membranes. Also, the influence of NaCl both during PEC fabrication and during polymerization was studied and found to have some effect on the solute permeability. Results showed that a higher content of PANI was formed on PEC membranes having excess P⁺ and with no NaCl added during PEC fabrication. Although X-ray diffraction confirmed the presence of PANI on both sides of each membrane, scanning electron microscopy images demonstrated that both sides of each membrane had different PANI content deposited. Electrical conductivity measurements using a four-point probe setup also showed that the PEC–PANI exhibits asymmetric electrical property on different sides. © 2021 Society of Industrial Chemistry.     

Influence of physicochemical binder properties on agglomeration of wheat powder in couscous grain

Wet agglomeration mechanisms developing in low shear mixers have been described considering a fractal morphogenesis process that links the median size of the agglomerates with their solid volume fraction via a fractal dimension. It appears fundamental to integrate the polydispersity of the generated structures (nuclei, agglomerates, dough pieces) in the analysis of the agglomeration process in order to approach the industrial problems. The objective of this study is to correlate the influence of the physicochemical characteristics of several liquid binders, on the fractal agglomeration mechanisms. To do so, we considered the values of the fractal model parameters. The obtained results confirmed that semolina wet agglomeration follows a fractal morphogenesis for the different applied liquid binders. Our results also showed a marked influence of the studied physicochemical properties of the liquid binder on the value of the fractal model parameters. During wet agglomeration in low shear mixers, the mechanisms implied during agglomeration (wetting, nucleation and growth) do not occur consecutively, but they coexist throughout at each water contents.     

Early Stages of Recrystallization in Equal-Channel Angular Pressing (ECAP)-Deformed AA3104 Alloy Investigated Using Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM) Orientation Mappings

Early stages of recrystallization in alloys containing complex structure of second phase particles are of considerable practical interest. They were observed for the AA3104 alloy in which large particles occur against the background of randomly distributed dispersoids. The samples were deformed by equal channel angular pressing and then slightly annealed to obtain the state of partial recrystallization. The highly deformed alloy contained a structure of flat grains with the spacing between high-angle grain boundaries ranging from 100 nm to 1 ??m. On annealing, the structure coarsened and got transformed into nearly equiaxed grains by both discontinuous and continuous recrystallization. The nucleation of new grains was observed in statically recrystallized bulk samples using scanning electron microscopy, and during in-situ recrystallization in a transmission electron microscope. Special attention was paid to the nucleation of new grains in areas close to large second phase particles, where a relatively high stored energy was expected to stimulate nucleation. A particular role in the rise of nuclei is attributed to migration of low angle boundaries. During recrystallization at 623 K (350?°C), in most of the observed cases, the growth of grains occurred by coalescence of neighbouring cells and by migration of high-angle grain boundaries. These processes led to nearly equiaxed grains of similar size. Orientation mappings showed that although orientations of new grains were widely scattered, they were not completely random.     

Motion planning algorithms for molecular simulations: A survey

Motion planning is a fundamental problem in robotics that has motivated research since more than three decades ago. A large variety of algorithms have been proposed to compute feasible motions of multi-body systems in constrained workspaces. In recent years, some of these algorithms have surpassed the frontiers of robotics, finding applications in other domains such as industrial manufacturing, computer animation and computational structural biology. This paper concerns the latter domain, providing a survey on motion planning algorithms applied to molecular modeling and simulation. Both the algorithmic and application sides are discussed, as well as the different issues to be taken into consideration when extending robot motion planning algorithms to deal with molecules. From an algorithmic perspective, the paper gives a general overview of the different extensions to sampling-based motion planners. From the point of view of applications, the survey deals with problems involving protein folding and conformational transitions, as well as protein–ligand interactions.     

The behavior of statically-indeterminate structural members and frames with cracks present

Crack stability is discussed as affected by their presence in statically-indeterminate beams, frames, rings, etc. loaded into the plastic range. The stability of a crack in a section, which has become plastic, is analyzed with the remainder of the structure elastic and with subsequent additional plastic hinges occurring. The reduction of energy absorption characteristics for large deformations is also discussed. The methods of elastic-plastic tearing instability are incorporated to show that in many cases the fully plastic collapse mechanism must occur for complete failure.     

Multi-level integrated planning and greening of public infrastructure in South Africa

The South African government has named the transition towards a greener economy one of its priorities. Meanwhile it has developed a new multilevel integrated planning process, and announced a massive public infrastructure investment plan. The converging point of these three dynamics should be the integration of green infrastructure principles into the different plans as the foundation of the green transition. This paper uses a policy integration analytical framework to assess whether this convergence is in fact taking shape. It analyses the level of integration of green infrastructure principles into the different plans and suggests options to move the green infrastructure agenda forward.     

Discovery of Highly Potent Dual Orexin Receptor Antagonists via a Scaffold‐Hopping Approach

Starting from suvorexant (trade name Belsomra), we successfully identified interesting templates leading to potent dual orexin receptor antagonists (DORAs) via a scaffold‐hopping approach. Structure–activity relationship optimization allowed us not only to improve the antagonistic potency on both orexin 1 and orexin 2 receptors (Ox1 and Ox2, respectively), but also to increase metabolic stability in human liver microsomes (HLM), decrease time‐dependent inhibition of cytochrome P450 (CYP) 3A4, and decrease P‐glycoprotein (Pgp)‐mediated efflux. Compound 80 c [{(1S,6R)‐3‐(6,7‐difluoroquinoxalin‐2‐yl)‐3,8‐diazabicyclo[4.2.0]octan‐8‐yl}(4‐methyl‐[1,1′‐biphenyl]‐2‐yl)methanone] is a potent and selective DORA that inhibits the stimulating effects of orexin peptides OXA and OXB at both Ox1 and Ox2. In calcium‐release assays, 80 c was found to exhibit an insurmountable antagonistic profile at both Ox1 and Ox2, while displaying a sleep‐promoting effect in rat and dog models, similar to that of the benchmark compound suvorexant.     

Design of New Cardanol Derivative: Synthesis and Application as Potential Biobased Plasticizer for Poly(lactide)

A novel biobased plasticizer made of cardanol is designed for poly(lactide) (PLA). This cardanol‐derived plasticizer, i.e., methoxylated hydroxyethyl cardanol (MeCard), is synthesized through methoxylation of the double bonds on the side chain of cardanol, and characterized by ¹H NMR and mass spectrometry. The plasticization effect of MeCard on the molecular structure, morphology, thermal and mechanical properties of PLA is evaluated and compared to that of a commercial cardanol, i.e., hydroxyethyl cardanol (pCard). The plasticization efficiency of MeCard is demonstrated by a substantial decrease of the glass transition temperature and storage modulus together with a significant increase of the elongation at break as compared to neat PLA. Moreover, MeCard exhibits higher plasticization performance than pCard toward PLA. Such behavior is related to a higher miscibility and compatibility between PLA and MeCard thanks to the methoxylation of the double bonds on the side chain of cardanol as shown by SEM micrographs.